1. Starbound Enable Mods
2. How To Use Starbound Mods
3. Starbound Free Item Servers
4. How To Mod Starbound

Adding steam workshop mods to your Starbound server is very easy. There are two ways you can get a file for a mod: Be a registered user on the Chucklefish Community forums at playstarbound.com and download it from there; From the Steam Workshop. If you download the file from the Starbound forums, save that somewhere you know you will be able to. Steam workshop mods didn't seem to work server side for me, so I downloaded the mod file from the Starbound forum and put that in the mods folder. That did seem to work. Installing mods on the server is necessary for anything that adds sprites into the game or modifies game variables. For using mods on Nitrous-Networks you just create a mods folder in the main server directory as shown in the attached picture.

• 1Quick Navigation
  • 1.1Step 1 - Unpacking Assets
  • 1.2Step 2 - Modding
  • 1.3Step 3 - Setting Up Your First Mod
  • 1.4Step 4 - Packing your mod
  • 1.5Step 5 - Publishing

This article will show you the steps you need to take before you can start actually modding, and also the steps you can take after you are done modding, to pack and publish your mod.

You will need a text editor that is not the Windows included notepad.exe, as it does not support UNIX line endings. Do not use a word processor such as MS Word instead of a text editor. Only UTF-8 is supported, other encodings are likely to cause crashes. Optionally, for easier packing and unpacking of mods and assets, you may use ModPackHelper (available for Windows and Linux) or PAK GUI.

Step 1 - Unpacking Assets

Furious Koala introduced a .pak format which improves loading times and eases mod distribution. This means we need to unpack the assets before we can start modding.

Note - This step will not remove or change your packed.pak file, but simply extract its content for use as reference material. Unpacked assets may be safely left in .assets and changes you make to the unpacked assets will have no effect on your game as Starbound will prioritize the use of assets.pak (unless the unpacked _metadata is deleted).

Windows

Current as of Version 1.4.3, June 27th, 2019

1. Open up the main directory folder for Starbound.
2. Shift + right-click within the folder and select Open Command Prompt/Windows Powershell or equivalent (depends on Windows version).
3. Type the following into Command Prompt/Windows Powershell: .win32asset_unpacker.exe '.assetspacked.pak' '.assetspacked'
4. Command Prompt/Windows Powershell will do nothing until asset_unpacker.exe has finished, this will take a while on most computers.. There are no progress updates.
5. Once Command Prompt displays a message equivalent to this, 'Unpacked assets to Packed in 250.063s,' you can close the program and move on to creating mods.

Notes

• If purchased from Steam, the location of the main Starbound directory folder typically looks like this: SteamsteamappscommonStarbound
• The text typed into Command Prompt are three directory locations:
  1. The location of asset_unpacker.exe, which is the program that does all of the unpacking.
  2. The location of Starbound assets, or Mod assets, to be unpacked.
  3. Where you want the unpacked assets to be dumped. This third string can be changed to whichever location or name you prefer. However, dumping into .assetspacked will make assets more readily available to Tiled.
• The command can be stored as a batch file for faster unpacking whenever a new game version is released.

It is advised to read the Unofficial Modding E-book instead, available on Chucklefish Forums. http://community.playstarbound.com/resources/unofficial-modding-ebook-2-0.2930/

Mac

Current as of version 1.3.0, June 13th, 2017

If you have purchased Starbound from Steam, then these instructions will work. Otherwise you will have to find your Starbound assets folder and apply the file paths to these instructions.

1. Open Terminal.app in OS X (hopefully you have 10.7 or higher)
2. Type cd ~/Library/Application Support/Steam/steamapps/common/Starbound/assets Now you are in the assets folder.
3. You need to create a new folder here where you want your unpacked assets to end up. Type mkdir unpacked
4. Now you need to navigate to the asset_unpacker. Type cd ./osx
5. Type ./asset_unpacker ./assets/packed.pak ./assets/unpacked (The asset_unpacker should finish anywhere from 1 to 500 seconds depending on your computer, so let it work. If it takes longer than 20 minutes, quit Terminal.app and start over. If retrying doesn't work, then you have an issue external to the asset_unpacker.)
6. In Finder browse to your unpacked folder by clicking on 'Go' on the menu bar, holding the [alt/option] key on your keyboard (this will show Library, which is usually hidden), clicking on Library, then browsing to -> Application Support -> Steam -> steamapps -> common -> Starbound -> assets -> unpacked (sound familiar?).

It is highly recommended that you make a backup copy of your original, working packed.pak before you mod and pack.

To pack, do exactly the same steps as mentioned above (minus making a new folder 'unpacked'), but when you get to step 5, where you actually unpack the packed.pak file:

• Type ./asset_packer ./assets/unpacked ./assets/packed.pak

Linux

Current as of version 1.2.3b, May 26th, 2017

1. Open the main directory of starbound in your shell (i.e. ~/.steam/steam/steamapps/common/Starbound if purchased on steam)
2. Type the following into your shell: linux/asset_unpacker assets/packed.pak unpacked_assets
3. linux/asset_unpacker is the path to the executable
4. assets/packed.pak is the path to the packed assets
5. unpacked_assets is the name of the directory, where it'll extract the files in. If the directory doesn't exist, it'll be created.
6. There is no progress bar while unpacking, but after completion, it'll print something like this: Unpacked assets to unpacked_assets in 70.0567s
7. After that message appears, you can close the shell and start creating mods.

Step 2 - Modding

Tutorials

Reference Pages

If you did everything right, Starbound should load your new mod the next time you run it. If the game crashes, or your changes are not found in the game, check your starbound.log file.

Step 3 - Setting Up Your First Mod

_metadata file

Full Article: Metadata file

The metadata file (usually named _metadata) is a completely optional file that contains your mod's name, description, and more. If using the Steam Uploader Tool, a basic metadata file will be generated for you. While optional, it is recommended to have at least have a name set in the metadata in case a companion mod ever needs to require or include your mod, and to make your mod more easily identifiable within the game log should any errors occur.

Step 4 - Packing your mod

Before publishing your mod, it is recommended to pack it as a single <modname>.pak file. This simplifies installation (drop the file in the Starbound/mods/ folder). The alternative is to just put all the files into an archive for distribution which will need to be unpacked by end users to install.

Steam

The mod uploader included with the Steam version of Starbound will automatically pack your mod into a pak file when it uploads to the workshop. If you subscribe to your own mod, you may copy this pak from the workshop folder for redistribution through other channels, or you may follow standard packing methods. Linux users may use Proton to launch the mod uploader.

Alternately, all users may use the SteamCMD method as per this guide by The Suit. Psx emulator memory card file. This is the only reliable option for Mac users.

General

To pack your mod into a pak file, you may either manually use asset_packer.exe as included with Starbound, or you can automate it with PAK GUI or ModPackHelper.

Manual Method

1. Create a metadata file for your mod if you intend to include one.
2. For ease of use, ensure your mod folder is in .Starboundmods
3. Open a command prompt as described in Unpacking assets.
4. Run the following command: .win32asset_packer.exe .mods<mod folder name> .mods<modname>.pak (substitute <mod folder name> with your mod's folder and <modname> with whatever you wish)
5. Once finished, your .pak will be in the .Starboundmods folder and is ready to publish.

PAK GUI

1. Create a metadata file for your mod if you intend to include one.
2. Extract PAK GUI anywhere and run it.
3. Point the 'Path to Starbound' to the base Starbound folder.
4. Either click 'Pack..' or drop your mod's folder onto PAK GUI and follow the prompts.

Windows/Linux with ModPackHelper

1. Unpack ModPackHelper directly into .Starboundmods and run it.
2. When script is launched, choose action 1.
3. Then select the mod you want to pack (If your mod folder does not contain a _metadata or legacy .modinfo file, it will not show as a choice).
4. Press Enter. The mod is available in the Starbound/mods/ folder as <modname>.pak.

Step 5 - Publishing

Only one thing left to do - publish your mod!

Steam

Once you have all desired fields filled in the uploader, hit 'Upload to Steam'. When the status bar vanishes, you're done!

Chucklefish

Go to the official modding forums, select 'add mod' in the upper right hand section, select the category of your mod, fill out the information form and hit save. It is that easy.

Other Services

Publishing methods for other services, such as NexusMods, may vary. Please refer to the individual service for more information. Otherwise, your mod's folder or pak file may be distributed as you choose.

External links

• Chucklefish Forums: How to successfully pack and unpack .pak files
• Chucklefish Forums: Getting started in making mods for Starbound
• Chucklefish Forums: Unofficial Modding Ebook 2.0
• Chucklefish Forums: ModPackHelper

Find below a list of all Starbound console commands for players and server administrators, updated for the latest version of Starbound on Steam (1.3.3, PC / Mac).

Starbound Enable Mods

Type the name of a command into the search bar to instantly search the cheat table. Hover over a command to show detailed help and information for its arguments.

How To Use Starbound Mods

All commands start with /. To send commands, simply type them into the chat and hit enter.

Some commands require admin privileges: to gain access to these admin commands, you must first toggle admin mode on by typing the /admin command. Commands requiring admin privileges have Admin Only in their description in the below table.

Starbound Free Item Servers

Additionally, some commands require debug mode to be first activated by running the /debug command, the descriptions of these commands contain the label Debug Mode.

For more help using console commands, please see our command guide.

How To Mod Starbound

You can switch between different command layouts by pressing the 'Table View' and 'Card View' buttons. Type the name of a command into the search box below to instantly search our database of 61 Starbound admin commands.